China Suppliers Factory - Cone Crusher Wear Parts Bowl Liner, Mantle & Concave for Hydraulic Spring Type Crushers
Product Introduction
The concave and mantle are connected by casting zinc alloy, its firmness should be checked after the cone crusher has been running for a period of time. The connection between the concave and the adjustment ring is fixed by U-shaped fixing screws. Zinc alloy is cast between the concave and the adjustment ring to make them tightly combined.
The mantle can be replaced on site. Unscrew the adjusting screw sleeve installed on the upper frame (note that it should be rotated counterclockwise), remove the upper chamber hopper assembly, lift the adjusting screw sleeve with a lifting device, remove the adjusting screw sleeve support plate bolts, and then remove the concave for replacement. When assembling, clean the outer surface, apply butter on the thread surface of the adjusting screw sleeve, and install it in reverse order.
According to different cavities of concave and mantle, the crushing can be divided into three types: coarse crushing, medium crushing and fine crushing.
Product Display
Why Choose Us?
Chengdu Zhixin Refractory Technology is a technology-based enterprise integrating R&D, production, sales and empowerment. We are committed to providing one-stop services that save worry and cost for all crushing companies.
The high-performance crusher wear-resistant parts we developed can increase the service life by more than 2 times, and we promise a full refund if it cannot be achieved. Our crusher wear-resistant parts have been actually verified by countless users, which greatly reduces your comprehensive use cost and increases production and efficiency.
Working Principle
The crushing process is completed by the eccentrically rotating crusher mantle and concave driven by the eccentric sleeve. The material enters the crushing chamber through the upper feed hopper, is discharged from the lower part after crushing, and is collected and discharged by the inlet and outlet hoppers.
The crusher liners are the parts that directly "confront" the crushed materials, especially when crushing a lot of hard ores. Therefore, the quality and performance of the crusher wear parts are particularly important, which is related to the crushing efficiency and comprehensive cost.
Product Features
1. Wide range of applications
We can provide you with wear-resistant parts for multiple crushing equipment, such as Metso, Sandvik, Symmons, Dahongli, Sambo, etc. We will query the corresponding drawings from the database based on the equipment photos, nameplates, part numbers you provide, and produce them accurately.
2. Customized cavity type
As we all know, there are many different cavities between cone crusher liners. Even the same model of crusher usually has several different cavities for crushing ores or materials of different particle sizes. Although the crusher liner you are using cannot be changed, we can customize other cavities for you to meet your new crushing needs. The premise is that the installation size of the liner does not change.
3. Excellent Durability
The main feature of Chengdu Zhixin Refractory Technology's crusher wear-resistant parts is durability, and it is promised that the service life can reach more than twice that of conventional wear-resistant parts under the same working conditions.
4. Lower cost of use
Crusher wear parts are consumables and easily damaged. Therefore, when you choose a consumable with better performance and longer service life, you are naturally choosing to save money.
Please refer to the table below for our wear-resistant parts parameters, which are data certified by the Ministry of Science and Technology.
Frequently Asked Questions
How are the concave and mantle connected in a cone crusher?
The concave and mantle are connected by casting zinc alloy. The connection between the concave and the adjustment ring is fixed by U-shaped fixing screws, with zinc alloy cast between them to ensure a tight combination.
How do you replace the mantle on site?
To replace it, unscrew the adjusting screw sleeve counterclockwise, remove the upper chamber hopper assembly, and lift the adjusting screw sleeve using a lifting device. Then, remove the support plate bolts and take out the concave. Clean the outer surface, apply butter to the threads, and assemble in reverse order.
What makes Chengdu Zhixin's wear-resistant parts more durable?
Our high-performance wear-resistant parts are engineered with advanced technology and are proven to increase service life by more than 2 times compared to conventional parts under the same working conditions, backed by a full refund promise.
Can you customize different cavity types for cone crushers?
Yes, we can customize other cavity types to meet your specific crushing requirements, provided that the installation size of the liner remains unchanged.
Which brands of crusher equipment are compatible with your parts?
We provide wear-resistant parts compatible with multiple brands, including Metso, Sandvik, Symmons, Dahongli, Sambo, and more, accurately matching drawings based on your photos, nameplates, or part numbers.
Why is the quality of crusher liners so critical?
Crusher liners directly handle the hard materials being crushed. High-quality liners ensure superior crushing efficiency, prevent premature wear, and significantly lower your comprehensive operational costs.